Question: How far out should a shower valve be installed?

The lower crosspiece, which will hold the shower valve, may be around 50 inches from the floor for a shower enclosure and lower for a bathtub -- just enough to clear the lip of the tub by a few inches. The top crosspiece, which supports the showerhead, may be 76 inches above the floor in a typical installation.

How far back should a shower valve be placed?

For shower-only controls, between 36 and 48 inches from the floor is common. Employ your helper to hold the fixture at an estimated height and then see if its a comfortable reach for all users.

Can a shower valve leak behind the wall?

When someone is showering, you might see water dripping from the ceiling. Most times shower valve leaks behind the wall are very slow. Usually, they are pinhole leaks from a faulty valve or sloppy soldering from the water connection points to the valve.

Where should shower controls be placed?

Shower controls should be placed 38 inches to 48 inches off the floor, according to NKBA Bathroom Planning Guidelines. Offsetting the controls toward the front of the shower will make them accessible both inside and outside the water spray.

How do you tell if pipes are leaking behind a wall?

What are the Signs of a Water Leak Behind Walls?Musty odors.Visible mold growth on walls and baseboards.Staining.Peeling or bubbling paint and wallpaper.Warped walls.Buckled ceilings and floors.Mar 14, 2019

How do you tell if there is a leak behind a wall?

Subtle Signs of a Leak Behind a WallThere is mold or mildew in a non-shower area. There is peeling paint on the walls.The wallpaper is peeling.The bathroom has a water-stained or cracked ceiling.The flooring in the bathroom is buckled or cracked.There is a musty smell in a room that wont go away.Mar 13, 2018

How high should shower head be from floor?

80 inches What Is the Standard Shower Head Height? Lets tackle the most important question right away by pinpointing the standard height for a shower head. According to Hunker, the industry standard for how high a shower head should be is 80 inches. Were talking 80 inches above the floor of the bathroom.

How tall should niches be?

about 48 to 60 inches Positioning your niche at chest to eye-level is a good standard. This translates to a height of about 48 to 60 inches. Ideally, youll want to position your niche to fit between the studs which are usually located 16 inches apart. But many contractors can help you with planning the space for a more custom look.

How do you tell if a mixing valve is bad?

3 Signs Your Thermostatic Mixing Valve Has a Problem. Andrew Vanny. Your water temperature isnt right. If a TMV valve stops working correctly, then you may notice that your hot water suddenly starts to run hotter than it should. Your water doesnt flow normally. You have leaks or drips.Aug 3, 2020

Can plumbers detect leaks?

Leak detection is an important service that plumbers offer. Using the techniques below, licensed plumbers can find exactly where leaks are occurring so they can accurately and quickly repair them.

Is Delta plaster guard required?

When installing a Delta faucet, use a plastic plaster guard to prevent unwanted debris from entering the shower valve head. Place it on the end of the faucet before the installation is complete, when the plaster or drywall is being installed on the shower wall.

Tell us about you

Find us at the office

Konno- Clarizio street no. 93, 50578 Berlin, Germany

Give us a ring

Kaylah Molenkamp
+97 681 738 272
Mon - Fri, 10:00-16:00

Contact us