Question: What is a block plane best for?

A block plane has many other uses in woodworking. Typically, it is used for cleaning up components by removing thin shavings of wood in order to make a component fit within fine tolerances. Chamfering (angling square edges) and removing glue lines are some of the other uses woodworkers find for the block plane.

Can I use a block plane for smoothing?

Here I am using a block plane to level and smooth an inset repair and thats is a function block planes can be ideal for. Generally they are not used for planing wide surfaces at all and often result more in damaging the surface than solving a planing issue – This is really the function of a smoothing plane.

What are low angle block planes used for?

The low-angle block plane is a fine tool used for cleaning up end grain after cutting a board to length, for removing the arris, for shaping of outside curves, and for cutting angles such as an under-bevel on the bottom side of a board.

How do you make a block plane?

Wooden Block PlaneStep 1: Cutting the Wood. First thing you need to do is cut the wood to width. Step 2: Cut the Sides. Step 3: Cut the Iron Angle. Step 4: Cutting the Other Angle. Step 5: Drilling the Holes. Step 6: Getting Ready for Glue-up. Step 7: Glue Up the Block Plane. Step 8: Cutting the Shape.More items

What is the purpose of a smoothing plane?

A smoothing plane or smooth plane is a type of bench plane used in woodworking. The smoothing plane is typically the last plane used on a wood surface, removing very fine shavings to leave a smooth finish. When used effectively it quickly produces a finish that equals or surpasses that made by sandpaper.

What angle should a block plane be?

about 20 degrees A standard block plane (like a Stanley 9-1/2) has a 1 5/8-inch-wide iron and a bedding angle of about 20 degrees. (Note that the bedding angle—not to be confused with the bevel angle of the iron—is the angle at which the iron sits in the carriage of the plane.)

What angle should I sharpen my block plane?

Blade Sharpening The low-angle block plane has a bed angle of 12° and the blade comes honed at an angle of 25°. Since the blade is used bevel up, the effective cutting angle will be 37°. The 25° blade bevel is ideal for fine trimming work on end-grain softwood and some hardwoods.

How do you make a wooden block plane?

Wooden Block PlaneStep 1: Cutting the Wood. First thing you need to do is cut the wood to width. Step 2: Cut the Sides. Step 3: Cut the Iron Angle. Step 4: Cutting the Other Angle. Step 5: Drilling the Holes. Step 6: Getting Ready for Glue-up. Step 7: Glue Up the Block Plane. Step 8: Cutting the Shape.More items

How does a plane tool work?

A cutter that extends below the bottom surface, or sole, of the plane slices off shavings of wood. A large, flat sole on a plane guides the cutter to remove only the highest parts of an imperfect surface, until, after several passes, the surface is flat and smooth.

Tell us about you

Find us at the office

Konno- Clarizio street no. 93, 50578 Berlin, Germany

Give us a ring

Kaylah Molenkamp
+97 681 738 272
Mon - Fri, 10:00-16:00

Contact us